Mass Home Comfort
Find contractors
HVAC · Wrentham, MA

HVAC in Wrentham, Massachusetts

What applies to this work in Wrentham, Norfolk County: Mass Save, rebates and financing, and the permit. Then the contractors serving the town.

30 contractors serving Wrentham, including 2 based in town.

Is Wrentham in Mass Save?

Yes. Wrentham gets its electricity from National Grid, not from a municipal light plant, so homes in Wrentham are in the Mass Save program. Its natural gas comes from Eversource or Liberty, depending on the address (the state's list), both Mass Save sponsors.

Wrentham is not on the state's list of municipal light plants. Mass Save is not statewide: 41 light plants serve all or part of 50 municipalities, and homes on their electric service are outside its electric program (Mass Save in municipal light plant towns).

Heat pump rebates and financing in Wrentham

A whole-home air source heat pump installed in Wrentham in 2026 earns a Mass Save rebate of $2,650 per ton, up to $8,500; a partial-home system, with the old boiler or furnace kept as backup, earns $1,125 per ton, up to $8,500.

The whole-home rebate needs ENERGY STAR cold-climate equipment from the qualified product list, a contractor in the Mass Save Heat Pump Installer Network, and a home that is weatherized first. 33% of Wrentham's homes were built before 1960 (Census ACS 2018-2022), so check the weatherization condition early.

Income-eligible households can get up to $16,000 for a whole-home system.

The HEAT Loan finances heat pumps at 0% interest, up to $25,000 over the life of your Mass Save upgrades.

There is no federal tax credit to add: the IRS says the energy efficient home improvement credit (25C) is not allowed for any property placed in service after December 31, 2025.

Do you need a permit for a heat pump, furnace, boiler or AC in Wrentham?

Yes, and which permits depends on the equipment. A gas furnace or boiler needs a gas-fitting permit, which only a licensed plumber or gas fitter can pull. A heat pump burns no fuel, so it needs no gas permit; its wiring needs an electrical permit filed by a licensed electrician, and the equipment a building or mechanical permit from Wrentham, usually pulled by the contractor.

permits.llc carries the rules: its Massachusetts guide to furnace, boiler and AC permits, its guide to permits for a ductless mini split, and the Wrentham Building Department page, with the department's contact and portal. For a sense of volume, permits.llc counts 1,238 building, mechanical, sheet metal and gas permits filed in Wrentham in October 2025 through September 2026 (its count).

Contractors serving Wrentham

Claimed listings within 5 miles come first, then the rest by rating, then distance. Google ratings as of October 2026. How we list and rank contractors

Common questions about HVAC in Wrentham

Is Wrentham in Mass Save?
Yes. Wrentham gets its electricity from National Grid, not from a municipal light plant, so homes in Wrentham are in the Mass Save program. Its natural gas comes from Eversource or Liberty, depending on the address (the state's list), both Mass Save sponsors.
How much is the Mass Save heat pump rebate in Wrentham?
A whole-home air source heat pump installed in Wrentham in 2026 earns a Mass Save rebate of $2,650 per ton, up to $8,500; a partial-home system, with the old boiler or furnace kept as backup, earns $1,125 per ton, up to $8,500.
Can I finance a heat pump in Wrentham with the HEAT Loan?
Yes. There is no federal tax credit to add: the IRS says the energy efficient home improvement credit (25C) is not allowed for any property placed in service after December 31, 2025.
Is there a federal tax credit for a heat pump installed in Wrentham in 2026?
No. The IRS says the federal energy efficient home improvement credit (25C) is not allowed for any property placed in service after December 31, 2025, so a heat pump installed in 2026 gets no federal credit.
Do you need a permit for a heat pump, furnace, boiler or AC in Wrentham?
Yes, and which permits depends on the equipment. A gas furnace or boiler needs a gas-fitting permit, which only a licensed plumber or gas fitter can pull. A heat pump burns no fuel, so it needs no gas permit; its wiring needs an electrical permit filed by a licensed electrician, and the equipment a building or mechanical permit from Wrentham, usually pulled by the contractor.

HVAC guides for Massachusetts homeowners

All HVAC guides →

HVAC contractors in nearby towns

PlainvilleFranklinNorfolkFoxboroughNorth AttleboroughBellinghamMansfieldMedway