Windows & Doors · Malden, MA

Windows & Doors in Malden, Massachusetts

Compare contractors serving Malden, Middlesex County — call them directly, or send one request and let qualified pros come to you.

50 contractors serving Malden — including 2 based in town.

Contractors serving Malden

Windows & Doors in Malden — what to know

Permits in Malden

The City of Malden requires a permit through the Inspectional Services Department for any window or door replacement that changes the opening size, structural framing, or egress configuration. Like-for-like sash replacements typically don't need a permit but must meet current egress code. The Malden Square area and parts of Edgeworth fall under the city's historic-overlay rules — verify with Inspectional Services before ordering visible exterior changes.

Typical project cost

Window-and-door costs in Malden sit a bit below Boston-city pricing and in line with the broader inner-suburb market. Standard vinyl replacement windows typically run $600–$1,000 installed per opening; wood or composite for historic-compatible installs are $1,400–$2,900 per opening. Entry door replacement is typically $1,900–$4,800 installed depending on material. Triple-decker projects add tenant-coordination and staging overhead, often pushing per-opening cost slightly higher.

About Malden homes

Malden sits just north of Boston in southern Middlesex County — about 66,260 residents across roughly 26,800 housing units, with a median construction year close to 1942. The housing stock is dominated by triple-deckers and pre-war two-families across Edgeworth, Faulkner, and the Maplewood neighborhoods, with brick apartment buildings near the Malden Center T station and post-war single-families in West End and Linden.

Most local window-and-door work is concentrated in the triple-decker stock — either full-frame ENERGY STAR replacement done in batches by floor, or like-for-like sash replacement to preserve street-facing aesthetics. Entry doors and storm doors also get frequent attention given the dense walk-up exposure.

Rebates & tax credits

Malden is in National Grid electric territory, so homeowners qualify for the Mass Save weatherization program. Mass Save doesn't directly rebate replacement windows, but it heavily subsidizes the insulation and air-sealing work around window and door openings — typically rebated at 75%+ when surfaced through a free home energy assessment.

The federal 25C Energy Efficient Home Improvement Credit expired for property placed in service after December 31, 2025, so 2026 window and door work no longer qualifies. For Malden triple-deckers, the Mass Save air-sealing rebate remains the key lever for bringing a 1920s building's envelope toward modern performance.

Common questions — Windows & Doors in Malden

Can I get rebates for replacement windows in Malden?
Mass Save doesn't directly rebate windows, but it subsidizes air-sealing around openings at 75%+ after the free home energy assessment. The federal 25C credit expired December 31, 2025 and no longer applies to 2026 work.
I own a Malden triple-decker. How does window replacement usually work?
Most owners do them in batches — sometimes one full floor at a time, sometimes all openings during a single multi-day project. Coordinating with tenants and staging across floors is the main scheduling challenge; experienced inner-suburb contractors handle it routinely.
Do I need a permit for window replacement?
For like-for-like sash replacements in the existing opening, usually no permit is required. Changes to opening size, structural framing, or egress always require a permit through Inspectional Services.
Are there historic restrictions in Malden?
Parts of Malden Square and Edgeworth fall under historic-overlay rules. Verify with Inspectional Services before ordering visible exterior changes — sash material and muntin pattern usually fall under review.
What ENERGY STAR rating should I look for?
For Climate Zone 5 (which includes Malden), ENERGY STAR requires U-factor ≤ 0.27 and SHGC ≤ 0.40 for replacement windows. Most reputable product lines meet this; ask the installer for the NFRC label on any unit you're quoted.

Windows & Doors contractors in nearby towns