Kitchen & Bath · Malden, MA

Kitchen & Bath in Malden, Massachusetts

Compare contractors serving Malden, Middlesex County — call them directly, or send one request and let qualified pros come to you.

50 contractors serving Malden — including 9 based in town.

Contractors serving Malden

Kitchen & Bath in Malden — what to know

Rebates & incentives

Malden is in National Grid electric territory, so homeowners and condo owners qualify for the full Mass Save rebate menu. The most relevant rebates during a kitchen or bath project are the heat pump water heater rebate (around $750 replacing an electric tank, roughly $1,400 replacing a gas water heater) and the income-eligible HEAT Loan and weatherization tracks.

The federal 25C credit expired December 31, 2025 and no longer applies to 2026 work. National Grid's induction range pilots have generally offered $300–$500 per qualifying unit; check the active Mass Save program list before ordering. A free Home Energy Assessment is the prerequisite for the larger rebate amounts and often surfaces eligible weatherization work in older brick walk-ups and triple-deckers.

Permits in Malden

The Malden Inspectional Services Department issues building permits, with separate plumbing, electrical, and gas permits required for fixture relocations or new gas-range hookups. Standard residential permits typically clear in one to two weeks. The very old housing stock — most Edgeworth and Maplewood buildings predate 1940 — places nearly every kitchen and bath job under EPA RRP lead-safe rules. Condo-trust approval is usually the bigger gate than the city permit for downtown brick walk-ups and triple-decker conversions.

Typical project cost

Malden sits 10–15% below Boston and Cambridge pricing but above the outer cities. A mid-range bath remodel typically lands $18,000–$32,000, with high-end gut jobs running $36,000–$54,000. Kitchens usually fall in the $38,000–$68,000 range for a full mid-range remodel, with custom-cabinet projects in West End single-families or larger Edgeworth homes pushing $90,000+. Big cost variables include condo-trust requirements, parking and dumpster permits on narrow streets, third-floor demo access, and the knob-and-tube wiring and cast-iron stacks common in pre-WWII multi-families.

About Malden homes

Malden has roughly 66,000 residents in Middlesex County, with a median construction date north of 85 years — older than most of its inner-suburb neighbors. The remodel work splits across three main types: dense triple-deckers and two-families concentrated in Edgeworth, Faulkner, and Maplewood, brick walk-up apartment buildings near Malden Center T (many now converted to condos), and post-war single-family ranches and Capes across the West End and Linden.

The condo-conversion share is substantial, similar to Somerville and Cambridge. Many Edgeworth and Maplewood triple-deckers have been split into individually owned units, which means most bath and kitchen remodels involve condo-trust paperwork. The downtown brick walk-ups around the Orange Line stop are nearly all condo now, with very mixed-condition kitchens and baths from various conversion-era renovations.

Common questions — Kitchen & Bath in Malden

Do I need condo-trust approval for a remodel in my Malden Center brick walk-up condo?
Almost always yes. Most Malden condo trusts — even small two- and three-unit conversions — require an alteration agreement, a contractor certificate of insurance, and sometimes simple plans before wet-area work. Plan two to four weeks for trust approval.
Does Mass Save apply to my Edgeworth triple-decker condo?
Yes — Malden is in National Grid territory, so the full Mass Save program applies. Most condo trusts now allow in-unit heat pump water heaters. Start with a free Home Energy Assessment to unlock the larger rebate amounts.
How much does a typical Malden bath remodel cost?
A mid-range bath in Malden generally lands $18,000–$32,000. High-end gut jobs with custom tile and a curbless shower run $36,000–$54,000. Cosmetic refreshes on the existing layout can come in around $13,000–$20,000.
My Faulkner triple-decker has cast-iron drain stacks. How does that affect a bath remodel?
Fixture relocations get expensive — moving a toilet or tub typically means opening ceilings in the units below, and cast-iron stacks sometimes need partial PVC replacement during the gut. Most cost-efficient triple-decker baths keep the fixtures in their original footprint.
What permits do I need for a West End kitchen remodel?
Any layout change requires a Malden building permit. Plumbing fixture relocations need a plumbing permit, new circuits need an electrical permit, and any gas range relocation needs a gas permit. A cabinet-only refresh on the existing layout often doesn't need a building permit.
How long does a Linden bath remodel take?
For a mid-range single-family bath in a Linden post-war ranch or Cape, plan on four to six weeks of on-site work plus three to five weeks of design and ordering. Post-war single-families are some of the most predictable jobs in Malden — fewer surprises than triple-deckers.

Kitchen & Bath contractors in nearby towns