Electricians · Hull, MA

Electricians in Hull, Massachusetts

Compare contractors serving Hull, Plymouth County — call them directly, or send one request and let the ones who want the job come to you.

30 contractors serving Hull.

Contractors serving Hull

Claimed listings within 5 miles come first, then the rest by rating, then distance. Google ratings as of October 2026. How we list and rank contractors

Electricians in Hull — what to know

Rebates & incentives

Hull is served by the Hull Municipal Light Plant, a town-owned utility — not Eversource or National Grid. That means Mass Save's electric rebates, which are funded by the investor-owned electric utilities, don't apply here, and Mass Save reaches Hull homes only through a gas account with an investor-owned gas company. Without one, don't count on Mass Save heat-pump or weatherization dollars here.

Instead, check the Hull Municipal Light Plant directly for any electrification or efficiency incentives it offers its own ratepayers; municipal light plants set their own programs and they vary year to year. A 200A panel upgrade is still the practical prerequisite for an EV charger or a heat pump in Hull, and you'll usually be funding the equipment through HMLP programs or out of pocket rather than Mass Save.

Permits in Hull

Electrical work in Hull requires a permit under 527 CMR 12.00, the Massachusetts version of the NEC, and must be pulled by a licensed Journeyman or Master electrician. The Town of Hull's wiring inspector handles review and the rough and final inspections, and the Hull Municipal Light Plant coordinates the service disconnect and reconnect for upgrades. Flood-zone and coastal lots — most of Hull — can carry added rules on meter and equipment elevation. Service changes, new circuits, and generator wiring all require permits; like-for-like device swaps are the usual exception.

An electrical permit in Hull is filed with the town’s wiring inspector; see the Hull Building Department’s contact, portal and who pulls the permit on permits.llc.

Typical project cost

South Shore coastal labor runs above central Massachusetts. A 100A-to-200A panel upgrade in Hull typically runs $2,700–$4,900, often at the higher end because corrosion-damaged meter sockets and masts need rebuilding. A Level 2 EV-charger circuit is usually $900–$2,100. A whole-home standby generator with an automatic transfer switch — very common on this storm-exposed peninsula — generally lands $10,000–$18,000 installed. Marine-rated, corrosion-resistant outdoor equipment adds cost but pays off in salt air.

About Hull homes

Hull is a narrow Plymouth County peninsula of about 10,116 residents across roughly 5,831 housing units, jutting into Massachusetts Bay between Hingham Bay and the open ocean. The median home age of around 83 years is the oldest in this group — a dense mix of former summer cottages and year-round conversions, many never wired for modern loads.

That old, sea-exposed housing defines the work: salt-air corrosion eats meter sockets and disconnects, storms knock out overhead lines, and cottages converted to year-round use need service upgrades. Common Hull jobs are panel and meter heavy-ups, generator and transfer-switch installs, knob-and-tube remediation, and EV and heat-pump circuits.

Common questions — Electricians in Hull

Can I get Mass Save rebates in Hull?
It depends on your gas service. Hull is served by the Hull Municipal Light Plant, a town-owned utility, so Mass Save reaches Hull homes only through a gas account with an investor-owned gas company. Check with HMLP directly about any electrification or efficiency incentives it offers its own customers.
Why do generators make sense on the Hull peninsula?
Hull sits exposed to ocean storms, and its overhead lines go down in high wind. A licensed electrician can wire a whole-home standby generator or a manual transfer switch so your heat, well or sump pump, and essentials keep running through outages.
Does salt air really affect my electrical equipment in Hull?
Yes. Coastal corrosion shortens the life of meter sockets, disconnects, and generator enclosures across the peninsula. Electricians here often spec corrosion-resistant, marine-rated outdoor equipment to avoid early failures.
Do I need a permit to upgrade my service in Hull?
Yes. Any service or panel upgrade requires an electrical permit under 527 CMR 12.00 and a licensed electrician. The Hull wiring inspector inspects the work, and the Hull Municipal Light Plant handles the disconnect and reconnect.
Can I still add a heat pump or EV charger in Hull without Mass Save?
Yes. An EV charger gets no Mass Save funding here, and a heat pump qualifies only when it replaces gas heat billed by an investor-owned gas company. A 200A panel upgrade is usually the prerequisite, and a licensed electrician installs it under permit. Ask the Hull Municipal Light Plant whether it offers any local incentives toward the equipment.

Electricians contractors in nearby towns