Electricians · Quincy, MA

Electricians in Quincy, Massachusetts

Compare contractors serving Quincy, Norfolk County — call them directly, or send one request and let qualified pros come to you.

50 contractors serving Quincy — including 4 based in town.

Contractors serving Quincy

Electricians in Quincy — what to know

Rebates & incentives

Quincy is in Eversource electric territory, so homeowners are Mass Save eligible. The electrical work itself isn't rebated, but a 200A panel upgrade is generally the prerequisite for a Mass Save heat pump or heat-pump water heater — an older 100A service often can't carry the equipment plus existing load.

Given Quincy's 1960s–70s housing share, aluminum branch wiring is worth checking too; it's a safety and insurance matter separate from any rebate. For coastal homes, weather-exposed meter sockets and service masts sometimes need replacement before new circuits are added.

Permits in Quincy

Electrical work in Quincy requires a permit under 527 CMR 12.00, the Massachusetts NEC amendments, and a licensed Journeyman or Master electrician. Permits are pulled through the City of Quincy's Inspectional Services / Building Department, and a municipal wiring inspector inspects before energizing. Panel upgrades, meter-socket replacement, EV circuits, and rewires all need permits. Coastal and flood-zone properties may have added requirements for service-equipment placement, so confirm scope with your electrician early.

Typical project cost

Quincy sits on the higher South Shore band, just under Boston metro. A 100A-to-200A panel upgrade typically runs $2,800–$5,200; a meter-and-mast relocation costs more, especially on weather-exposed coastal homes. A Level 2 EV-charger circuit generally runs $1,000–$2,300. Aluminum-branch remediation ranges from device-level pigtailing up to several thousand for broader work. A whole-home standby generator with transfer switch usually runs $8,500–$15,500 installed.

About Quincy homes

Quincy has roughly 47,424 housing units in Norfolk County, with a median home age around 67 years. The city spans dense older multi-families in Quincy Center and Wollaston, mid-century single-families in Squantum and Houghs Neck, and a growing share of condos, so the electrical needs run the gamut from fuse-panel swaps to modern EV circuits.

The postwar-and-later stock puts many homes in the era of 100A service and, in 1960s–70s builds, aluminum branch wiring. Coastal neighborhoods on the Quincy Bay side also see corrosion and storm-driven service work alongside the steady demand for panel upgrades.

Common questions — Electricians in Quincy

Is Quincy in Eversource or municipal territory for rebates?
Quincy is served by Eversource, an investor-owned utility, so homeowners are Mass Save eligible. A 200A panel upgrade is usually the prerequisite before a rebated heat pump or heat-pump water heater goes in.
Do coastal Quincy homes need special electrical work?
Sometimes. Weather-exposed meter sockets and service masts in neighborhoods like Houghs Neck and Squantum corrode faster, and flood-zone rules can affect where service equipment sits. An electrician should check before adding new circuits.
My 1970s Quincy home has aluminum wiring — what now?
A licensed electrician can remediate aluminum branch wiring with approved connectors at devices or rewire affected runs. It's a safety and insurance issue, not just an upgrade, since aluminum connections can loosen and overheat.
Do I need a panel upgrade before a heat pump in Quincy?
Usually. Many Quincy homes run 100A service that can't comfortably carry an air-source heat pump plus existing load. A 200A upgrade is the typical prerequisite for the Eversource/Mass Save heat-pump rebate path.
Who inspects electrical work in Quincy?
The City of Quincy's inspectional/building services issues the permit under 527 CMR 12.00, and a municipal wiring inspector inspects before the work is energized. Your licensed electrician handles the permit and inspection.