Windows & Doors · Danvers, MA

Windows & Doors in Danvers, Massachusetts

Compare contractors serving Danvers, Essex County — call them directly, or send one request and let qualified pros come to you.

50 contractors serving Danvers — including 1 based in town.

Contractors serving Danvers

Windows & Doors in Danvers — what to know

Permits in Danvers

Window and door replacement in Danvers requires a building permit from the town's Building Department when you change an opening, alter a header, or convert a window to a door. Like-for-like swaps may use a simplified permit, but inspectors still review bedroom egress, tempered glazing near doors and tubs, and fall protection on upper floors. Homes built before 1978, common near the historic center, fall under the EPA RRP lead rule and require a lead-certified installer. Permit fees are modest, and contractors typically include them in the project quote rather than billing the homeowner separately for paperwork.

Typical project cost

Danvers pricing is close to the North Shore regional average. A standard vinyl double-hung replacement runs roughly $650 to $1,100 installed per opening; larger picture, bay, or premium-frame units run higher. An entry-door replacement with a steel or fiberglass slab, frame, and hardware typically falls between $1,800 and $4,500 depending on sidelights. Patio sliders generally land at $2,500 to $5,500. Pre-1978 homes add $50 to $150 per window for lead-safe work. A whole-house project of a dozen windows commonly runs $10,000 to $18,000.

About Danvers homes

Danvers is an inland North Shore town in Essex County, home to about 27,900 residents and historically known as the former Salem Village tied to the witch-trial era. The Route 1 commercial corridor runs through town, and the housing is a suburban mix: older homes near the center and along historic stretches, postwar capes and ranches, and newer subdivisions.

The older and postwar homes drive most of the window and door demand. Many mid-century homes still carry original aluminum or first-generation vinyl windows that have fogged or lost their seals, while older center homes need careful replacements fit to irregular openings. Replacement double-hungs and sliders are the staple jobs, with steel and fiberglass entry-door swaps close behind as old doors give out.

Rebates & tax credits

In Danvers, electric service comes from the Danvers Electric Division, the town's own municipal light plant. Municipal electric customers don't pay the Mass Save charge, so the electric route to the ENERGY STAR windows and weatherization rebate is closed in town. A second route can still exist. Weatherization replaces nothing, so the rebate may run through a participating gas account, and many Danvers homes take gas service from National Grid, a Mass Save sponsor. Even gas hot water counts as gas service. If little or no gas reaches the home, no route opens. Confirm your gas service on a recent bill, then learn how municipal-electric towns fall outside Mass Save.

Common questions — Windows & Doors in Danvers

Can I get Mass Save rebates for windows in Danvers?
No. Danvers is served by Danvers Electric, a municipal utility, so it does not participate in Mass Save. You won't have the free home energy assessment or the subsidized air-sealing that Eversource and National Grid customers get. The federal 25C credit also expired December 31, 2025. Check Danvers Electric for any current local programs.
What ENERGY STAR rating should windows meet in Danvers?
Danvers is in Climate Zone 5, so windows should be ENERGY STAR certified for the Northern zone: a U-factor of 0.27 or lower and an SHGC of 0.40 or lower. Check the NFRC label against both numbers when selecting units.
Is there any local rebate for windows in Danvers?
Possibly. Danvers Electric runs its own conservation programs that change over time. Since the town isn't in Mass Save, check the utility's current offerings directly before buying, as any local incentive would come from Danvers Electric rather than the statewide program.
Do I need a permit to replace windows in Danvers?
Yes, in most cases. The Building Department requires a permit when openings change and reviews egress and safety glazing even on like-for-like swaps. Reputable contractors pull it as part of the job.
Does the lead rule apply to older Danvers homes?
Yes. Homes built before 1978, common near the historic center, fall under the EPA RRP rule, so the installer must be lead-certified, adding about $50 to $150 per window for containment and disposal.

Windows & Doors contractors in nearby towns