American Made Masonry

Massachusetts has no masonry license, so masons in Burlington work under Home Improvement Contractor (HIC) registration plus insurance. A structural chimney rebuild, fireplace repair, or any work affecting the building envelope needs a building permit from the Burlington building department, and chimney lining must meet the state fire code (527 CMR) for clearances and listed liners. CSIA chimney-sweep certification is voluntary but worth asking for. Hardscape and cosmetic repointing usually need no permit, but a tall retaining wall or structural chimney work does, so confirm scope before starting.

Burlington sits in the Boston-metro labor band, above central or western MA. Chimney repointing or tuckpointing typically runs $1,000–$3,300. Rebuilding a chimney above the roofline runs roughly $2,500–$7,500. Relining a flue is usually $2,500–$7,000 depending on height and liner type. Crown or cap repair runs $350–$1,400. Because the housing skews newer, hardscape is common: brick step or walkway repair lands around $1,600–$6,000, and a retaining wall can start near $4,000 and climb with height, drainage, and stone selection.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential masonry & chimney work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other masonry & chimney contractor serving the town, on the Masonry & Chimney in Burlington page.