Gordillo Restoration

Massachusetts requires a building permit for roof replacement, reviewed by the Burlington Building Department. State code requires ice-and-water shield membrane at the eaves, in valleys, and around penetrations — important given the town's ice-dam exposure, especially on split-level low-slope sections. A full tear-off to the deck is generally preferred over an overlay because it lets the roofer inspect and replace damaged sheathing and lay the ice barrier properly; code limits roofs to two layers. Permits in Burlington turn around quickly, and reputable contractors pull the permit and schedule the inspection as part of the project.

Burlington roofing costs sit in the typical inner-suburb range. A standard asphalt-shingle tear-off and replacement generally runs $8,000–$24,000 depending on size, pitch, and complexity — straightforward capes and ranches land lower, while split-levels with intersecting planes and low-slope garage sections push higher. Flat or low-slope EPDM over breezeways, garages, and additions runs roughly $7,000–$18,000. Standing-seam metal runs about $20,000–$45,000, and slate, rare here, higher still. Steep pitches and extensive flashing around dormers and chimneys add labor.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential roofing work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other roofing contractor serving the town, on the Roofing in Burlington page.