Windows & Doors · Waltham, MA

Windows & Doors in Waltham, Massachusetts

Compare contractors serving Waltham, Middlesex County — call them directly, or send one request and let qualified pros come to you.

50 contractors serving Waltham — including 8 based in town.

Contractors serving Waltham

Windows & Doors in Waltham — what to know

Permits in Waltham

The City of Waltham requires a permit through the Inspectional Services Department for any window or door replacement that changes the opening size, structural framing, or egress configuration. Like-for-like sash replacements typically don't need a permit but must meet current egress code. Properties in the Banks Square or Warrendale Historic District areas need additional Historical Commission review for visible exterior changes — sash material, profile, and muntin pattern come under review.

Typical project cost

Window-and-door costs in Waltham sit close to Boston-city pricing — the Route 128 corridor commands a premium over the outer metro. Standard vinyl replacement windows typically run $650–$1,100 installed per opening; wood or composite for historic-compatible installs are $1,500–$3,100 per opening. Entry door replacement is typically $2,000–$5,200 installed depending on material and sidelite configuration. Multi-family work adds tenant-coordination overhead.

About Waltham homes

Waltham anchors the inner Route 128 corridor in Middlesex County — about 65,070 residents across roughly 25,900 housing units, with a median construction year close to 1948. The housing stock is unusually varied: Victorian and Italianate single-families across Warrendale and the Banks Square area, mid-century ranches and split-levels in Lakeview and Cedarwood, brick triple-deckers and two-families near Moody Street, and newer townhomes off Route 20.

Local window-and-door work spans the full era range — historic-compatible wood replacement in Warrendale, ENERGY STAR full-frame in the mid-century neighborhoods, and entry-door + sidelite packages across the board. Brandeis-area rentals also drive a steady stream of investor window upgrades.

Rebates & tax credits

Waltham is in Eversource electric territory, so homeowners qualify for the Mass Save weatherization program. Mass Save doesn't directly rebate replacement windows, but it heavily subsidizes the insulation and air-sealing work around window and door openings — typically rebated at 75%+ when surfaced through a free home energy assessment.

Note: the federal IRS 25C energy-efficiency tax credit (which previously offered up to $600/year for windows and $500/year for doors) expired for property placed in service after December 31, 2025. For Waltham's pre-war and mid-century stock, the Mass Save air-sealing subsidy remains the primary available incentive alongside the long-term energy savings of ENERGY STAR-certified units.

Common questions — Windows & Doors in Waltham

Can I get rebates for replacement windows in Waltham?
Mass Save doesn't directly rebate windows, but Waltham is in Eversource territory, so you qualify for Mass Save air-sealing and insulation subsidies around openings at 75%+ after a free home energy assessment.
I own a Warrendale Victorian. Can I replace the windows without losing the look?
Yes. Several manufacturers offer historic-compatible wood or composite units that match original sash profile and muntin pattern. The Waltham Historical Commission reviews material, profile, and grid pattern for visible elevations in the district.
Do I need a permit for window replacement?
For like-for-like sash replacements in the existing opening, usually no permit is required. Changes to opening size, structural framing, or egress always require a permit through Inspectional Services.
Why are window prices higher in Waltham than further out?
The Route 128 inner corridor commands a labor and overhead premium over the outer metro. Travel time, parking, and competition for contractor capacity all contribute. Bulk-quantity quotes can partially offset this.
What ENERGY STAR rating should I look for?
For Climate Zone 5 (which includes Waltham), ENERGY STAR requires U-factor ≤ 0.27 and SHGC ≤ 0.40 for replacement windows. Most reputable product lines meet this; ask the installer for the NFRC label on any unit you're quoted.

Windows & Doors contractors in nearby towns