Fencing · Pembroke, MA

Fencing in Pembroke, Massachusetts

Compare contractors serving Pembroke, Plymouth County — call them directly, or send one request and let qualified pros come to you.

50 contractors serving Pembroke — including 1 based in town.

Contractors serving Pembroke

Fencing in Pembroke — what to know

Rebates & incentives

Fencing is not an energy-efficiency measure, so no Mass Save or energy rebate applies, and there is nothing to chase either way. The controlling rules in Pembroke are zoning and wetlands. Height limits typically allow up to 6 ft in rear and side yards with a lower cap in the front-yard setback; confirm with the building department. With Furnace Pond, Oldham Pond, the North River, and surrounding wetlands, the Conservation Commission and the Wetlands Protection Act often govern fences within a buffer zone, so a review can precede the permit. Pool barriers must meet MA code: at least 4 ft tall with self-closing, self-latching gates. Pembroke is Eversource territory, which has no bearing on a fence.

Permits in Pembroke

Pembroke requires a building or zoning permit for most fences, and your contractor should hold state Home Improvement Contractor (HIC) registration. The building department reviews height, setback, and placement, and pondside or riverside lots commonly add a Conservation Commission step near wetlands. Post footings should reach about 48 inches for frost depth, and sandy or wet soil near the ponds changes how posts are set. Call Dig Safe (811) before digging. A current plot plan helps confirm distance from any wetland resource.

Typical project cost

Pembroke fence pricing sits in the typical South Shore suburban range. Vinyl/PVC privacy runs roughly $40–$65 per linear foot installed; cedar privacy about $35–$60; aluminum ornamental $40–$70; chain-link $20–$35. Longer runs on larger lots, gated pool barriers, old-fence removal, and wetland-buffer rerouting near the ponds and river all raise the total. Smaller, dry, accessible lots land at the lower edge of these bands.

About Pembroke homes

Pembroke has about 18,330 residents across 6,809 housing units in Plymouth County, with a median home age near 49 years that reflects postwar and later suburban growth on moderate to large lots. The town is dotted with ponds and the North River runs along its edge.

That setting favors vinyl/PVC and cedar privacy fence, with pool-barrier and chain-link fencing common too. Pondside and riverside parcels, much like those in neighboring Hanson and Marshfield, often sit near wetland buffers, which determines where a fence can legally be placed.

Common questions — Fencing in Pembroke

Do I need a permit for a fence in Pembroke?
Yes, most fences require a building or zoning permit from the Pembroke building department, which checks height and setback. Lots near Furnace Pond, Oldham Pond, the North River, or other wetlands may also need Conservation Commission review first.
My lot is near a pond. Will that affect my fence?
It can. A fence inside a pond or wetland buffer zone falls under the Wetlands Protection Act, so the Conservation Commission reviews it before the building permit issues. Plan for the extra time.
What does a pool fence need to meet in Pembroke?
Massachusetts code requires a pool barrier at least 4 ft tall with self-closing, self-latching gates. Pool fencing is one of the more common fence projects on Pembroke's larger residential lots.
How tall can my fence be in Pembroke?
Rear and side fences are typically allowed up to 6 ft, with a lower limit in the front-yard setback. Confirm exact figures with the building department, since corner and pondside lots can carry extra rules.
Does sandy soil near the ponds affect post setting?
It can. Footings still need to reach about 48 inches for frost depth, but sandy or wet ground near Pembroke's ponds may require wider footings or extra bracing, which a good fence contractor will account for in the quote.