MMServices

Everett's Inspectional Services Department in City Hall requires a building permit for any roof replacement. Massachusetts code requires ice-and-water shield at eaves on sloped roofs (24 inches past the warm wall) and proper membrane detailing on flat roofs. Triple-deckers and two-families routinely need extra review when roof work touches shared chimneys, party walls, or means of egress — common in Glendale and Edgeworth where buildings sit two to four feet apart, complicating staging, dumpster placement, and tear-off debris control. The state permits only one shingle overlay, so sloped-roof work usually means a full tear-off to the deck. Local roofers handle the filings and the tight-lot logistics together.

Everett roofing prices run closer to Boston metro than to outer suburbs because of density, parking constraints, and triple-decker labor. Flat EPDM rubber replacement on a triple-decker roof typically runs $9,000-$18,000 for the main roof section, more if multiple levels or large additions are involved. Asphalt shingle re-roofs on the smaller single-families and bungalows run $9,000-$17,000. Standing-seam metal is $20,000-$45,000 and uncommon here. Tight setbacks, crane or boom-lift staging for membrane delivery, and shared-chimney flashing all add labor on most Everett jobs.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential roofing work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other roofing contractor serving the town, on the Roofing in Everett page.