Mastrangelo and Sons

Belmont requires a building permit for roof replacement, reviewed by the Town of Belmont Building Department at Town Hall. Massachusetts code requires ice-and-water shield membrane along eaves, in valleys, and around penetrations — essential here given Belmont's ice-dam exposure. A full tear-off down to the deck is generally preferred over a second-layer overlay because it lets the installer inspect and replace damaged sheathing and properly lay the ice-and-water barrier; code limits roofs to two layers in any case. Period homes on Belmont Hill or near the historic center may draw extra scrutiny on visible material changes, so confirm any review before ordering non-matching shingles.

Roofing costs in Belmont sit a notch above central Massachusetts because of the older, steeper colonial roofs and tighter in-town access. A standard asphalt-shingle tear-off and replacement typically runs $9,000–$25,000 depending on size, pitch, and the number of stories; a flat or low-slope EPDM section (common on porches and additions) runs roughly $7,000–$18,000. Slate work is the wild card — repairing or restoring an original slate roof on a Belmont Hill colonial runs well above asphalt, and a full slate replacement can reach the $30,000–$60,000 range. Standing-seam metal falls between, around $20,000–$45,000.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential roofing work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other roofing contractor serving the town, on the Roofing in Belmont page.