Jdh carpentry inc.

Pembroke requires a building permit for residential re-siding through the town Building Department, and reputable contractors pull it as part of the job. Homes built before 1978 fall under the federal lead RRP rule, so the crew should be Lead-Safe Certified when disturbing old painted wood or trim. Some mid-century homes were clad in asbestos-cement shingle; where testing confirms it, removal must follow Massachusetts DEP asbestos abatement procedures rather than a standard tear-off. Pond-side and wetland-adjacent lots, common in Pembroke, may involve Conservation Commission review for work near the water.

Re-siding a typical Pembroke single-family runs roughly $12,000–$25,000 for standard vinyl, depending on size, stories, and any sheathing or trim repair found underneath. Insulated vinyl with foam backing generally lands around $16,000–$30,000. Fiber-cement such as James Hardie runs about $20,000–$45,000 given higher material cost and labor-intensive installation. Natural cedar sits above that range. South Shore labor keeps Pembroke pricing near the suburban average. Two-story colonials and homes with steep gables or detailed trim push toward the upper end, while simple single-story capes and ranches land lower, and asbestos abatement or extensive sheathing repair adds to any quote.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential siding work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other siding contractor serving the town, on the Siding in Pembroke page.