J W Dubis & Sons

There is no Massachusetts paving license, but residential paving contractors must hold a state Home Improvement Contractor (HIC) registration, and structural elements like a retaining wall need a licensed Construction Supervisor. In Chatham, the DPW and building department issue driveway and curb-cut permits, and a street-opening permit with inspection is required to tie into a town road. Near the shore, salt marsh, a coastal bank, or in a flood zone, expect a Conservation Commission filing under the Wetlands Protection Act before work starts. Permit fees are set per recent cycles; a Cape-experienced paver handles the conservation and public-way steps for you.

Cape Cod paving runs higher than mainland eastern MA because of seasonal-labor demand, ferry-and-bridge logistics for materials, and the engineering coastal sites require. A standard asphalt driveway install in Chatham typically lands at $5,000–$14,000, above the statewide band, with size, length, and base prep driving the spread. Sealcoating runs about $300–$700. Concrete sits around $8–$18 per square foot, and permeable pavers — common here for stormwater compliance — run higher still. Drainage design, coastal conservation requirements, and access on tight shoreline lots are the biggest cost factors.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential paving & driveways work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other paving & driveways contractor serving the town, on the Paving & Driveways in Chatham page.