Hocol Remodeling

Milford requires a building permit for siding replacement, processed through the town Building Department, with a final inspection after the work. Properties in the downtown Milford historic district may need additional Historical Commission review for exterior changes visible from the street, which can favor matched clapboard over vinyl on contributing homes. Pre-1978 homes — most of the downtown and older stock — fall under the EPA RRP lead rule and require a lead-certified crew for paint disturbance. Older homes with asbestos-cement shingle siding need a licensed abatement contractor to remove it before new siding goes on.

Milford pricing sits in the lower-mid tier for Massachusetts siding work — below the Boston metro suburbs and roughly in line with the broader Route 495 corridor. A standard vinyl re-side runs roughly $12,000–$23,000, and insulated vinyl $16,000–$28,000. Fiber-cement (HardiePlank) typically lands $20,000–$43,000 installed depending on size and trim. Cedar or matched clapboard on a downtown Victorian runs higher, generally $30,000–$58,000 once custom milling and period trim are factored in. Pre-1978 lead-safe handling, historic review, and any asbestos-shingle abatement add to all of these.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential siding work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other siding contractor serving the town, on the Siding in Milford page.