All Weather Exteriors LLC

Rowley requires a building permit for roof replacement through the town Building Department, and Massachusetts code requires an ice-and-water shield at the eaves and valleys. Near the coast and marsh, roofers may spec wind-rated shingles and tighter fastening. Most asphalt jobs are full tear-offs to the deck, letting the roofer inspect and replace rotted sheathing before re-roofing — common on the town's older homes. Antique homes near the historic center may need local review before a material change, and marsh-adjacent work can touch the Wetlands Protection Act. Reputable roofers pull the permit and schedule inspections.

Roofing costs in Rowley run near the North Shore suburban average, modestly below the Boston ring, with coastal-edge wind detailing adding a little near the marsh. A full asphalt-shingle tear-off and replacement generally runs $8,000–$23,000 depending on size, pitch, and layers removed; a flat or low-slope EPDM rubber section runs about $7,000–$16,000. Standing-seam metal runs roughly $20,000–$44,000, and cedar on antique homes costs above asphalt. Steep, multi-gable older roofs land toward the higher end.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential roofing work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other roofing contractor serving the town, on the Roofing in Rowley page.