Ace Asphalt Paving

Massachusetts has no statewide paving license, but a residential paving contractor must hold a Home Improvement Contractor (HIC) registration, and structural work calls for a Construction Supervisor License. In Wilbraham, a new or widened driveway typically needs a curb-cut/driveway permit from the DPW, and any work in the public way needs a street-opening permit. On sloped lots or near the rivers, brooks, or wetlands, expect the Conservation Commission to review added impervious surface and runoff. Established contractors pull these permits and handle inspections.

Western Massachusetts paving runs below Boston-metro and Cape rates, and Wilbraham tracks with the greater Springfield area. A typical asphalt driveway install runs about $4,500–$12,000 depending on size, slope, and how much old surface and base come out. Sealcoating is usually $250–$700. A concrete driveway runs roughly $8–$18 per square foot, with permeable pavers higher. On Wilbraham's hillside lots, slope, grading, and drainage over heavy clay are the main cost drivers — a steep driveway with runoff control costs more than a flat one of the same size.

Massachusetts requires a written contract and a Home Improvement Contractor registration for most residential paving & driveways work; ask for the registration number and check it before paying a deposit.

More on permits, costs, rebates and common questions, plus every other paving & driveways contractor serving the town, on the Paving & Driveways in Wilbraham page.