Mass Home Comfort
Find contractors
Electricians · Swansea, MA

Electricians in Swansea, Massachusetts

Compare contractors serving Swansea, Bristol County — call them directly, or send one request and let the ones who want the job come to you.

30 contractors serving Swansea.

Contractors serving Swansea

Claimed listings within 5 miles come first, then the rest by rating, then distance. Google ratings as of October 2026. How we list and rank contractors

Electricians in Swansea — what to know

Rebates & incentives

Swansea is in National Grid territory, so homeowners are fully Mass Save eligible. There's no direct electrical rebate, but a 200-amp panel upgrade is usually the prerequisite for a Mass Save heat pump or heat-pump water heater, and for a Level 2 EV circuit. Many of Swansea's post-war homes carry 100-amp service that needs upgrading first.

For 1960s-70s homes, the aluminum-branch-wiring question is worth raising with an electrician — it's an insurance and fire concern that pairs efficiently with a planned service upgrade. The panel work is the enabling step for the rebate, not a rebated item itself.

Permits in Swansea

Electrical work in Swansea requires a permit under 527 CMR 12.00, the Massachusetts amendments to the NEC, and a licensed Journeyman or Master electrician. Permits go through the Swansea Building Department, with the town wiring inspector inspecting before energizing. Panel upgrades, EV circuits, generator transfer switches, and aluminum-wiring remediation all require the permit. Service upgrades are coordinated with National Grid. Waterfront homes in the flood zone may face extra siting rules for outdoor equipment. Like-for-like device swaps are exempt.

An electrical permit in Swansea is filed with the town’s wiring inspector; see the Swansea Building Department’s contact, portal and who pulls the permit on permits.llc.

Typical project cost

Swansea sits in the South Coast band, with rates below Boston metro and roughly in line with central Massachusetts. A 100-to-200-amp panel upgrade typically runs $2,300–$4,300, more when a salt-corroded meter socket has to be replaced. A Level 2 EV charger circuit usually lands $850–$2,200. Aluminum-branch remediation ranges from a few hundred dollars for pigtailing to $10,000+ for a partial rewire. A whole-home generator with transfer switch commonly runs $8,000–$15,000.

About Swansea homes

Swansea is a Bristol County town of about 17,158 residents and 6,927 housing units, with a median build age near 57 years. The housing is largely post-war and mid-century single-family homes, with a stretch of waterfront and former seasonal properties along Mount Hope Bay and the Cole and Lee rivers.

That coastal exposure matters here: salt air corrodes meter sockets and outdoor service equipment faster than inland, and shoreline homes weigh generator wiring for storm outages. Across town, 100-amp panel upgrades, EV charger circuits, and heat-pump enablement are the routine jobs, with aluminum branch wiring appearing in some 1960s-70s homes.

Common questions — Electricians in Swansea

Does salt air near Mount Hope Bay damage electrical equipment in Swansea?
Yes. Meter sockets and outdoor service equipment corrode faster near the bay and the rivers, so Swansea panel upgrades on waterfront homes often include a new meter socket when the old one is pitted.
Is Swansea Mass Save eligible?
Yes. Swansea is served by National Grid, so you qualify for Mass Save heat pump and heat-pump water heater rebates. A 200-amp panel upgrade is usually the enabling step for the load, not a rebated item.
Could my 1970s Swansea home have aluminum wiring?
Possibly. Aluminum branch wiring appears in some late-1960s and 1970s homes and is an insurance and fire concern. A licensed electrician can pigtail it with approved connectors or recommend a partial rewire.
Do flood-zone rules affect waterfront electrical work in Swansea?
They can. Homes in the coastal flood zone may face siting requirements for meters, panels, and outdoor equipment. A licensed electrician handles the permit and the wiring inspector's review.
Do I need a permit for a generator hookup in Swansea?
Yes. Generator and transfer-switch wiring requires an electrical permit under 527 CMR 12.00 and a licensed electrician, with the Swansea wiring inspector signing off before it's energized.

Electricians guides for Massachusetts homeowners

All Electricians guides →

Electricians contractors in nearby towns

SomersetDightonRehobothFall RiverSeekonkBerkleyFreetownTaunton