Electricians · Lee, MA

Electricians in Lee, Massachusetts

Compare contractors serving Lee, Berkshire County — call them directly, or send one request and let the ones who want the job come to you.

30 contractors serving Lee — including 1 based in town.

Contractors serving Lee

Claimed listings within 5 miles come first, then the rest by rating, then distance. Google ratings as of October 2026. How we list and rank contractors

Electricians in Lee — what to know

Rebates & incentives

Lee is in Eversource territory, so homeowners qualify for Mass Save. The electrical panel itself isn't rebated, but a 200-amp service upgrade is typically the prerequisite that makes a Mass Save heat-pump or heat-pump water heater rebate possible — a meaningful factor in the cold Berkshires, where heat pumps usually need backup capacity.

With Lee's older housing, the knob-and-tube and insurance angle matters: homes still running that wiring or a 60A fuse box face growing pushback from carriers. Rewiring resolves the coverage problem and provides the headroom heat pumps and EV chargers require.

Permits in Lee

Electrical work in Lee requires a permit under 527 CMR 12.00 and a licensed Journeyman or Master electrician; only like-for-like device swaps may be exempt. The town wiring inspector reviews and inspects before energizing. In Lee's older village homes, panel jobs frequently involve replacing the service entrance and meter socket, with Eversource coordinating the disconnect and reconnect. Plan generator and heat-pump-circuit work ahead of winter, since Berkshire scheduling tightens once cold weather and storm season arrive.

An electrical permit in Lee is filed with the town’s wiring inspector; see the Lee Building Department’s contact, portal and who pulls the permit on permits.llc.

Typical project cost

Lee is in the Berkshires, where electrical labor runs at the lower end of the state's range. A 100A-to-200A panel upgrade typically runs $2,200–$4,000; a Level 2 EV charger circuit usually lands $600–$1,800. A full knob-and-tube rewire of an older Lee home ranges $9,000–$22,000 depending on size and plaster-wall access. A standby generator with transfer switch — popular given rural Berkshire outages — generally runs $9,000–$17,000 installed. Hillside seasonal homes with long service runs can push costs higher.

About Lee homes

Lee is a Berkshire County town of about 5,765 residents and roughly 3,053 housing units, with a median build age near 66 years. The town mixes an older village core tied to its paper-mill and limestone history with seasonal homes in the surrounding hills near Tyringham and October Mountain.

The older stock in Lee commonly carries knob-and-tube wiring and 60–100A fuse panels. Cold Berkshire winters drive heat-pump conversions and standby-generator installs, both of which routinely exceed the capacity of those original services — which is why a panel upgrade is so often the first step here.

Common questions — Electricians in Lee

Will my older Lee home need a panel upgrade for a heat pump?
Likely. Many homes here run 60–100A service that can't carry a cold-climate heat pump plus backup heat. A 200A upgrade is usually the prerequisite — and as a Eversource customer, it's what lets you claim the Mass Save heat-pump rebate.
Is knob-and-tube wiring common in Lee?
Yes, given the town's median home age near 66 years and its older village stock. Knob-and-tube turns up in attics and walls and is increasingly an insurance problem, so an electrician's assessment is worth getting.
Can I get Mass Save rebates in Lee?
Yes. Lee is Eversource territory, so homeowners are Mass Save eligible. The panel itself isn't rebated, but it's often the upgrade that makes a rebated heat pump or heat-pump water heater feasible.
When should I schedule a generator install?
Before winter. Berkshire storm outages make standby generators popular in Lee, but they need an electrical permit and the town inspector's sign-off, and electricians fill up heading into the cold season.
Who coordinates the utility side of a service upgrade?
Eversource. Your licensed Lee electrician pulls the permit under 527 CMR 12.00 and schedules the meter disconnect and reconnect with Eversource to align with the town inspection.