Mass Home Comfort
Find contractors
Insulation · Burlington, MA

Insulation in Burlington, Massachusetts

Compare contractors serving Burlington, Middlesex County — call them directly, or send one request and let the ones who want the job come to you.

30 contractors serving Burlington — including 3 based in town.

Contractors serving Burlington

Claimed listings within 5 miles come first, then the rest by rating, then distance. Google ratings as of October 2026. How we list and rank contractors

Mass Save in BurlingtonEligible

Burlington is served by Eversource, so homeowners qualify for the full Mass Save weatherization program. The no-cost Mass Save Home Energy Assessment is the starting point; once measures are approved, Mass Save typically covers 75-100% of attic, wall, and air-sealing costs (100% for income-eligible households), plus the 0% Mass Save HEAT Loan up to $25,000 for the homeowner share. In Burlington's postwar homes the assessment usually points to attic top-ups and air sealing; in older homes near the center it can flag knob-and-tube wiring or, in pre-1981 attics, vermiculite that needs testing first.

Read next

Insulation in Burlington — what to know

Permits in Burlington

Insulation in Burlington generally needs no standalone building permit, but the contractor should hold a current Home Improvement Contractor (HIC) registration, with a Construction Supervisor License (CSL) for structural work. Mass Save incentives require a participating, approved contractor. Spray foam must meet Massachusetts fire and ignition-barrier code, typically an ignition or thermal barrier in attics and living spaces. There's no unusual historic-district hurdle across most of Burlington, but always confirm your contractor's HIC standing before signing.

Where a permit is required, insulation work in Burlington is filed with the Burlington Building Department; see the Burlington Building Department’s contact, portal and who pulls the permit on permits.llc.

Typical project cost

Burlington sits in the inner-to-mid Boston metro along Route 128, so pricing runs above the state average. Attic insulation typically runs $1,500-$4,000, dense-pack wall insulation $2,000-$6,000, and air sealing $300-$1,500; spray foam runs higher per square foot. With much of the stock postwar, attic top-ups and air sealing are often the bulk of the cost. As an Eversource town, Burlington gets the Mass Save 75-100% incentive, which can bring out-of-pocket close to zero on approved measures.

About Burlington homes

Burlington is a Middlesex County town of about 26,169 residents across roughly 10,581 housing units, with a median home age near 54 years. The residential stock is mostly postwar suburban development, the Capes, ranches, and split-levels that filled in around the Route 128 and Middlesex Turnpike corridors, with older homes near the town center.

A mid-century median means most Burlington homes already have wall insulation, so the high-value work tends to be topping up attics that have lost R-value, sealing leaks at the attic plane and rim joist, and improving comfort in additions and finished basements. Older homes near the center can still need dense-pack wall work.

Common questions — Insulation in Burlington

Does Mass Save pay for insulation in Burlington?
Yes. Burlington is served by an investor-owned utility, so after a no-cost Mass Save Home Energy Assessment the program covers 75 to 100 percent of approved insulation and air sealing (no cost for income-eligible households) and finances the rest through the 0 percent HEAT Loan.
My postwar Burlington ranch already has wall insulation. What's worth doing?
Usually the attic and air sealing. Many homes from that era were built to lighter attic R-values than current code, so topping up the attic and sealing leaks is the cheapest comfort and efficiency upgrade. The assessment measures what you have.
Do I need to worry about vermiculite in my Burlington attic?
Only if the home predates 1981, which is a smaller share of Burlington's stock. If you have older loose, pebbly loose-fill, have it tested before any work, since vermiculite can contain asbestos.
Can my older home near the Burlington center be dense-packed with knob-and-tube?
Not until the active knob-and-tube is de-energized or remediated, which Massachusetts requires before dense-packing for fire safety. The Mass Save assessment will flag it as a first step in older homes.
Do I need a permit to insulate my Burlington home?
Insulation itself usually doesn't need a building permit. Confirm your contractor holds a current HIC registration, and for Mass Save work that they're a participating contractor, or the incentives won't apply.

Insulation guides for Massachusetts homeowners

All Insulation guides →

Insulation contractors in nearby towns

WoburnBedfordLexingtonWinchesterWilmingtonBillericaReadingStoneham