Mass Home Comfort
Find contractors
Masonry & Chimney · Attleboro, MA

Masonry & Chimney in Attleboro, Massachusetts

Compare contractors serving Attleboro, Bristol County — call them directly, or send one request and let the ones who want the job come to you.

30 contractors serving Attleboro — including 1 based in town.

Contractors serving Attleboro

Claimed listings within 5 miles come first, then the rest by rating, then distance. Google ratings as of October 2026. How we list and rank contractors

Masonry & Chimney in Attleboro — what to know

Rebates & incentives

Attleboro is in National Grid electric territory, so homeowners qualify for Mass Save. Masonry and chimney work itself is not a Mass Save rebate, but chimney relining and combustion-safety testing frequently come up as a follow-on to weatherization or when an oil or gas system is swapped for a heat pump. Pulling an old boiler can leave a flue with nothing to vent, and a remaining gas water heater on that chimney may need a properly sized liner.

Book the free National Grid Mass Save Home Energy Assessment first; it identifies the insulation and combustion work, and you schedule the masonry around which flues stay in service.

Permits in Attleboro

Massachusetts has no masonry license, so Attleboro masons operate under a state Home Improvement Contractor (HIC) registration with insurance. Structural masonry, chimney rebuilds, and fireplace work require a building permit from the Attleboro Inspectional Services Department, and chimney relining must satisfy the state fire code (527 CMR) on liner type and clearances. CSIA sweep certification is voluntary. If your project sits within the downtown historic mill district, expect added review of any exterior brick changes to keep the streetscape consistent.

Typical project cost

Attleboro falls in the moderate eastern-Massachusetts pricing band, a notch below Boston-metro and below the Cape. Chimney repointing or tuckpointing typically runs $1,000 to $3,500; rebuilding a chimney above the roofline is usually $2,500 to $8,000 or more; relining runs about $2,500 to $7,000. Cap and crown repair generally runs $300 to $1,500, and a brick step or walkway repair $1,500 to $6,000. Cost drivers are chimney height and access, whether the brick is soft historic masonry needing lime mortar, and the scale of any hardscape work.

About Attleboro homes

Attleboro is a Bristol County city of about 46,384 people across roughly 19,467 housing units, with a median home age near 54 years. The mix runs from a compact older downtown core, built around the city's jewelry-manufacturing past, out to large postwar and 1970s-onward subdivisions on the Norton and Rehoboth sides.

That split shapes the masonry work. The older downtown and the historic mill neighborhoods carry brick chimneys and masonry that need lime-matched repointing and occasional flue relining, while the newer ranches and colonials lean toward brick-veneer chimney caps, crown repair, and hardscape projects like steps, walkways, and retaining walls.

Common questions — Masonry & Chimney in Attleboro

Is my Attleboro home eligible for any rebate on chimney work?
Chimney work itself is not rebated, but Attleboro is National Grid territory and Mass Save eligible. If relining or combustion-safety work is tied to weatherization or a heat-pump conversion, the assessment may cover the related energy upgrades while you pay for the masonry.
Do I need a permit to repair my chimney in Attleboro?
Cosmetic sweeping or a cap swap usually does not, but structural repointing, rebuilds, and fireplace work require a building permit from Attleboro Inspectional Services. Relining must meet 527 CMR clearances. An HIC-registered mason handles the permit.
My 1960s Attleboro ranch has a brick-veneer chimney. What usually fails first?
On newer veneer chimneys the crown and cap go first, letting water into the flue and the masonry below. Crown and cap repair in the $300 to $1,500 range often prevents a much larger rebuild down the road.
I have an old brick chimney downtown. Can it be repointed instead of rebuilt?
Often yes. If the brick is sound and only the mortar joints have eroded, repointing with a lime-based mortar matched to the original is the right fix. A full rebuild is reserved for stacks that are leaning or have spalled brick.
Can a mason in Attleboro also build a retaining wall or new front steps?
Yes. Most masons here handle hardscape alongside chimney work. Retaining walls run roughly $4,000 to $15,000 or more depending on height and engineering, and brick or stone front steps run $1,500 to $6,000.

Masonry & Chimney guides for Massachusetts homeowners

All Masonry & Chimney guides →

Masonry & Chimney contractors in nearby towns

North AttleboroughPlainvilleNortonRehobothSeekonkMansfieldWrenthamFoxborough